PROCESS OF WASTEWATER TREATMENT PLANT - civilengineer friend

SSC JE 2019 QUESTIONS AND ANSWERS

civilengineer friend

Civilengineer friend no one website Civil engineering Subjects tutorial Learn Civil Engineering online Building construction Building material Bricks Cement Concrete technology Irrigation engineering R.C.C. Structure design Limit State Method Working Stress method Strength of material SFD and BMD Surveying Theory of structure Architects I Engineers I Developer Assure Quality With Excellence

test banner

Saturday, 8 December 2018

PROCESS OF WASTEWATER TREATMENT PLANT

PROCESS OF WASTEWATER TREATMENT PLANT

Wastewater enters the treatment plant
First it goes through a fine screen, next to aerated grit chamber, and then enters the primary clarifier. Sludge settled in the primary clarifier is sent to the fermenters and then to digesters.

After the primary treatment, wastewater flows into (BNR) bioreactors.

The activated sludge is separated in the following secondary clarifier. The clear effluent flows into Ultraviolet (UV), then to River. Settled activated sludge in the secondary clarifier is pumped back to BNR. 

Excess sludge is pumped into the dissolved air floatation (DAF) unit for thickening.

Wastewater is collected in sanitary sewers (a complex network of underground pipes). Upon reaching the treatment plant, the wastewater flows through a series of treatment processes which remove the wastes from the water. Each step the water becomes cleaner.
Wastewater enters the treatment plant.Grit Removal

In the grit chamber, heavy particles, such as a small stones, eggs shells, and coffee grounds settle to the bottom and are removed. These abrasive materials can damage pumps and cause equipment to fail prematurely the grit is removed and washed in the grit classifier before it is properly disposed.

Preliminary Treatment

Bar screens catch rags, sticks, plastic containers, and other objects floating in these large items are removed so that they do not clog pumps or interfere with other equipment process.
Grid chamber

Primary sedimentation tank

In the primary sedimentation or "settling" tank, heavier solids are given time to sink to the bottom. These solids called "primary sludge" are sucked out of the bottom of the tank. They are sent to a digester for further treatment. Oil, grease, and other scum that float of the wastewater are skimmed off and may be sent to the digester
Primary sedimentation tank

Fermenters

The fermenters are large and closed tanks with a rotating stirring mechanism. Sludge is fermented to produce the volatile fatty acids (VFAs) .The residual sludge along with scum is pumped to the sludge digesters . The foul air also functions as a supplementary air supply for the bioreactors.
Dissolved air floating (DAF) tank

Waste activated sludge is thickened in dissolved air floatation (DAF) tank to reduce the volume of sludge.
Under the effect of air bubbles flowing upwards, the sludge solids are carried to surface and skimmed out.



Anaerobic Sludge Digester

Anaerobic digestion is biological process which break down a significant amount of organic solids in the sludge and at the same time produces methane gas
BNR bioreactors

The bioreactor is divided into several cells. In some cells, air/ oxygen is introduced through diffusers in removing pollutants such as BOD; while in other cells, no air is required to remove nitrogen and phosphorus .

The pollutants serve as the food source to maintain the metabolism of the microorganisms.

Ammonia is released into the atmosphere. Phosphorus becomes part of the plant biosolids (Sludge).

Secondary sedimentation tank

The sludge from the bioreactors flows to large circular clarifier. Settled activated sludge is then pumped back to the bioreactor and excess activated sludge is pumped to the dissolved air flotation

No comments:

Post a Comment

If you are getting more information from civilengineerfriend page please give your comments. Share the page information in your whatsapp group. Subscribe our page to get more information.